PRODUCTS

Products

Contact Us

Submit

‹

›

‹

  • Inconel Plate
  • Inconel Plate
  • Inconel Plate
  • Inconel Plate
  • Inconel Plate
  • Inconel Plate

›

Inconel Plate
Phone : +86 13335176534
WeChat : +86 13335176534
Whatsapp : +86 13335176534
Email：cnxtal@cnxtal.com
CONTACT US
Product Description

The chemical composition near the grain boundaries of inconel steel products can be altered by the precipitationof chromium-rich grains. The resulting chromium-depleted regions at the grain boundaries make 4cr13 stainless steel products susceptible to intergranular anodic attack even in unstressed-conditions.

Specifying an inconel steel product implies a little over 12% Cr. Most stainless steels are based on the Fe-Cr-C Fe-Cr-Ni-C system, but there are also other important alloying elements.

Inconel steel products can exist in several crystal forms, the most common of which are body centered cubic (bcc) and face centered cubic (fcc). In pure iron, the fcc structure still exists between 910 and 1400 °C, this interval below and above the body-centered cubic structure up to the melting temperature of 1539 °C.

The importance of this stage of transformation in the metallurgy of inconel steel products cannot be overestimated. This transformation allows a wide range of microstructures to be achieved through controlled heat treatment. The nature is related to microstructure, mechanical properties, therefore, inconel steel products can be obtained in a very large range of strength, toughness and so on. Regular production of inconel steel 100 MPa over 1 GPA has a strong competitive strength. Therefore, the primary concern is the knowledge of the relative stability of the bcc and fcc structures of ferrous inconel steels.

Product NameMonel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
MaterialMonel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
ShapeRound,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
          GradeDuplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc
Alloy : Alloy 20/28/31
Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g

Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617, Hastelloy C,Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610, Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,

Hastelloy C276 / UNS N10276 /  DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665

Haynes: Haynes 230/556/188
Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20

Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 /  DIN W. Nr. 2.4851,Inconel 625 /

 UNS N06625 / DIN W. Nr. 2.4856, Inconel 725 / UNS N07725,Inconel X-750 /

 UNS N07750 / DIN W. Nr. 2.4669, Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816

Incoloy: Incoloy 800/800H/800HT/825/925/926;
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
Monel: Monel 400/K500/R405
Nitronic: Nitronic 40/50/60;
Nimonic: Nimonic 75/80A/90/A263 ;
  Specification

Wire: 0.01-10mmStrip: 0.05*5.0-5.0*250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm

;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm

  Product Characteristics

According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 

 According to the strengthening mode, there are solid solution strengthening type, 

precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..


StandardGB,AISI,ASTM,DIN,EN,SUS,UNS etc
InspectionISO,SGS,BV and so on.
 ApplicationHigh temperature components such as turbine blades, guide vanes,turbine disks, high pressure compressor disks,machine manufacturingand combustion chambers used in the manufacture of aviation, naval and industrial gas turbines
  Packaging

1.cases packed in wooden cases   2. paper packaging 3. plastic packing 

4. foam packagingPackaging according to customer requirements or products

Delivery7-25days orAccording to the product
 PaymentL/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer  requirements paymentsfor offline orders.


FAQ

Free Sample:

Q:Can you send samples?
A:Of course, we can send samples to all parts of the world, our samples are free, but customers need to bear the courier costs.

Quotation:
Q:What product information do I need to provide?
A:You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.
Q:About product prices?
A:Prices vary from period to period due to cyclical changes in the price of raw materials. 

Packaging&Shipping:
Q:How to pack the products?
A:The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion during ocean transportation. 
Q:How long does your delivery time take?
A:In general, our delivery time is within 30-45 days, and may be delayed if the demand is extremely large or special circumstances occur. 
Q:What are the shipping ports?

A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can choose other ports according to your needs.

Service:

Q:What is your working time?
A:In general, our online service time is Beijing time: 8:00-22:00, after 22:00, we will reply to your inquiry during the next working day.

Quality Control:

Q:Does the product have quality inspection before loading?

A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.

Q:Can I go to your factory to visit?

A:Of course, we welcome customers from all over the world to visit our factory. However, some of the plants are not open to the public.

Message
Submit
Products Recommended